# Deadwood FAQ

## INDEX

> 1. What is Deadwood?

> 2. How do I use Deadwood?

> 3. How do I convert a MaraDNS mararc file in to a Deadwood dwood3rc file?

> 4. I changed a configuration parameter but it has not affected Deadwood

> 5. Deadwood sends out a lot of queries

> 6. Steve Gibson's DNS benchmark reports that Deadwood is dropping a lot of DNS packets

> 7. Can Deadwood blacklist by name?

> 8. Does Deadwood have DNSSEC support?

> 9. Records added to the cache when the timestamp is set to 1970 do not expire

> 10. I get the error message "Unknown dwood3rc string parameter"

> 11. Internal IPs (198.168.x.x, 10.x.x.x, 172.16.x.x, 127.x.x.x) do not resolve in Deadwood

> 12. I get the error message "Uninitialized dictionary variable"

## What is Deadwood?

Deadwood is the recursive DNS daemon (service) for MaraDNS 2.0. MaraDNS 2.0 uses separate programs for authoritative records (maradns) and recursive records (Deadwood). Deadwood is a standalone recursive server that can either be used in conjunction with MaraDNS's authoritative server, or by itself. The program can run either in Scientific Linux 6 (and hopefully other Linux and *NIX flavors) or in Windows XP (as well as newer Windows releases).

The reason for this rewrite is because I have never been satisfied with the recursive resolver in MaraDNS 1.0. When I designed MaraDNS 1.0's recursive resolver, there were a number of things needed to get full recursion to work that I did not anticipate. By the time I shoehorned in all of the features needed in a fully recursive DNS server, the code was rather messy and difficult to maintain.

Ever since 2002, my plan has been to rewrite MaraDNS' recursive code. In the fall of 2007, I finally started making the code; the code became MaraDNS' recursive resolver in the fall of 2010.

## How do I use Deadwood?

Create a configuration file, `/etc/dwood3rc`, that looks like this:

    bind_address="127.0.0.1"
    recursive_acl="127.0.0.1/8"
    chroot_dir="/etc/deadwood"

Now, create an empty directory owned by root called `/etc/deadwood`. Once this is done, compile Deadwood (as per INSTALL.txt), and see if it runs. The above configuration file will only allow connections using the loopback interface on the same machine to resolve domains with Deadwood.

## How do I convert a MaraDNS mararc file in to a Deadwood dwood3rc file?

While some effort has been made to have Deadwood use the same syntax and variables as MaraDNS, there are some differences to keep in mind:

- Deadwood does not have a "ipv4_alias" parameter.
- Deadwood handles "verbose_level" differently; to get fully verbose messages, "verbose_level" has to be 100 (as opposed to MaraDNS' 10)

## I changed a configuration parameter but it has not affected Deadwood

Be sure to delete the cache file when making any changes to Deadwood's configuration. In Windows, the cache file is called dw_cache_bin (unless the dwood3rc.txt file is edited); in CentOS, with the default dwood3rc file, the file is called dw_cache.

## Deadwood sends out a lot of queries

Deadwood will do this on a slow network, since the default parameters are tuned to get a fast reply on a broadband internet connection. On a slow (dialup, saturated broadband, etc) connection, timeout_seconds should have a value of 7 and num_retries should have a value of 1. This is done by adding the following lines to the dwood3rc file:

    timeout_seconds = 7
    num_retries = 1

## Steve Gibson's DNS benchmark reports that Deadwood is dropping a lot of DNS packets

After running this tool and carefully looking at Deadwood's replies to Gibson's DNS benchmark tool, I can safely conclude that Gibson's tool is buggy and that Deadwood is not dropping the packets being sent to it.

A much better tool to use is Namebench, which correctly shows that Deadwood drops very few (if any) DNS packets sent to it. Namebench is available at available at http://code.google.com/p/namebench/

## Can Deadwood blacklist by name?

Yes; Deadwood can blacklist up to 500,000 names.

To blacklist a name, add a line like this to the dwood3rc file:

    ip4["scam.example.com."] = "X"

Replace "scam.example.com." with the domain to be blacklisted.

Deadwood uses a hash to store these blacklisted domains, and is able to store tens of thousands of such domains without significant slowdown.

If it is more convenient to store the domains in separate files, this can be done using Deadwood's "execfile" mechanism.

Note that older versions of Deadwood needed to increase the maximum_cache_elements value to store these; as of Deadwood 3.5.0004, this is no longer true.

## Does Deadwood have DNSSEC support?

No. I have nothing against DNSSEC per se, but I plain simply am not in a position to take the time and effort to implement DNSSEC without being compensated for my work.

## Records added to the cache when the timestamp is set to 1970 do not expire

This bug was fixed in Deadwood 3.2.02; Deadwood now rejects entries in the hash that expire in the far future. The issue was that, on non-Windows systems with 32-bit time_t, 1970 to Deadwood looks like the far future to make the program Y2038-compliant (The Windows port, while a 32-bit binary, gets its time from 64-bit timestamps since 2011).

## I get the error message "Unknown dwood3rc string parameter"

This error message indicates either one of two things:

- The relevant parameter is misspelled. For example, if one has a line like this in their dwood3rc file:

      bind_adress = "127.0.0.1"

  This error message will appear. To fix it, correct the spelling of the variable name:

      bind_address = "127.0.0.1"

- The relevant parameter is a numeric parameter, but has quotes around it. For example, the following line will trigger this error message:

      filter_rfc1918 = "0"

  To correct this, remove the quotes around the number:

      filter_rfc1918 = 0

For the record, all dwood3rc parameters except the following are numeric parameters:

- bind_address
- cache_file
- chroot_dir
- ip_blacklist
- ipv4_bind_addresses
- random_seed_file
- recursive_acl
- root_servers
- upstream_servers

## Internal IPs (198.168.x.x, 10.x.x.x, 172.16.x.x, 127.x.x.x) do not resolve in Deadwood

Deadwood, by default, filters out RFC1918 and other non-routable IPs from DNS replies, namely IPs in the form: 192.168.x.x, 172.[16-31].x.x, 10.x.x.x, 127.x.x.x, 169.254.x.x, 224.x.x.x, and 0.0.x.x.

To disable this behavior, so that Deadwood can resolve internal and other non-routable IPs, add this line to the Dwood3rc file:

    filter_rfc1918 = 0

Note that some routers filter DNS packets with non-routable IPs. Dave Owens, for example, had this problem.

## I get the error message "Uninitialized dictionary variable"

When setting either upstream_servers or root_servers, be sure to precede it with a line like this:

    upstream_servers = {}

or

    root_servers = {}

For example, if a line like this causes the uninitialized dictionary variable error:

    upstream_servers["."]="8.8.8.8, 8.8.4.4"

Add a line so it looks like this:

    upstream_servers = {}
    upstream_servers["."]="8.8.8.8, 8.8.4.4"